无色分散剂在聚合物多元醇中的应用研究

使用自制的具有特殊双键结构、低黏度、无色透明分散剂(BDF-4)合成高固含量普通聚合物多元醇(POP)。实验表明,采用BDF-4合成的聚合物多元醇,不仅黏度低、粒子细腻,而且水溶性很好;同时,由于分散剂特殊的结构使得所制备的聚氨酯软泡具有较高的承载力。     

人工湿地对印染达标尾水中低浓度锑的再削减

本研究通过水培实验和等温吸附实验分别考察了7种湿地植物和7种湿地填料对于印染达标尾水中低浓度锑及典型污染物的削减效果。通过动态实验考察不同湿地系统对各污染物的削减效果。结果表明,滴水观音和香蒲可作为印染达标尾水生态净化的优先考虑植物;无烟煤与沸石以质量比2∶1混合的填料在组合填料中具有较好的吸附效果;种植滴水观音的表面流湿地和种植香蒲的水平潜流湿地的组合湿地系统对印染达标尾水中低浓度锑具有较好的再削减能力。     

A comprehensive review on bioinspired solar photovoltaic cells

Researchers have derived inspiration from the biophotosynthetic structures in nature and have started to synthesize the modified bioinspired solar cells copying the evolved organic and inorganic material properties. One of the highlighted examples of bioinspired photo voltaic (PV) cells is the astonishing achievement of an increase in the absorption of integrated sunlight waves in unpatterned solar cells simulated from the wings of the butterfly. Further, deployment possibilities of incorporating flexible cells on flat or curved surfaces for optimizing performance are also under progress. This article mainly discusses the recent concepts of bioinspired solar cells at the research and development level with the prospects and challenges that lie ahead in the upcoming field of photovoltaic renewable energy cell technology. Different potential materials found suitable for bioinspired solar cells construction are reviewed with their particular challenges.     

Concentration dependence of physical properties of low temperature processed ZnO quantum dots thin films on polyethylene terephthalate as potential electron transport material for perovskite solar cell

Colloidal Zinc oxide quantum dots (ZnO QDs) prepared with varying concentrations through precipitation method were deposited on flexible ITO/PET substrates using spin-coating technique. Various characterization tools were utilized to investigate the morphological, structural, electrical and optical properties of the films. The crystallinity of the films was found to improve with increasing ZnO QD concentration (ZQ_C) as evident from the X-ray diffraction (XRD) and field emission scanning electron microscopy (FE-SEM) studies. Crystallographic and optical parameters were evaluated and explained in depth. The average nanograin size and bandgap were increased and decreased respectively, from ～5 nm to ～8 nm and 3.29 eV–3.24 eV with an increase in ZQ_C from 10 mg/mL to 70 mg/mL. Columnar structure growth of the films is revealed by AFM results. The films showed decent optical transparency up to 81%. All the ZnO films exhibited n-type semiconducting property as indicated by the electrical measurements with carrier mobility and low resistivity of 12.21–26.63 cm²/Vs and 11.84 × 10^?3 to 13.16 × 10^?3 Ω cm respectively. Based on the experimental findings, ZnO QD nanostructure film grown at 50 mg/mL is envisaged to be a potential candidate for flexible perovskite photovoltaic application.     

沿空掘巷小煤柱侧防瓦斯泄漏技术

针对赵庄煤业沿空掘巷存在的小煤柱侧瓦斯泄漏隐患,制定了"柔性薄喷+注浆"治理方案,采用柔性薄喷材料替代混凝土,喷涂厚度5 mm,有效解决了材料运输和开裂问题,采用高密度浅钻孔和快凝注浆材料,避免了浆液流入采空区。效果考察表明:柔性薄喷材料挂壁性和柔韧性良好,掘巷服务期间小煤柱侧未出现明显瓦斯泄漏。     

Optimizing the lignin based synthesis of flexible polyurethane foams employing reactive liquefying agents

The present work is focused on the optimization of a green process based on the employment of by‐products obtained from wood treatments as raw materials for producing flexible polyurethane foams. More specifically, lignin was employed in flexible polyurethane foams in order to partially replace the usual fossil polyols; therefore glycerol (GLY) and glycerin polyglycidyl ether (EJ 300) were used as the polyol fraction for lignin liquefaction. Polypropylene glycol triol was used as a chain extender in different ratios with liquefaction solvents, and polymeric diphenylmethane diisocyanate as an isocyanate fraction. Liquefaction of lignin was performed by microwave irradiation, thus reducing the processing time and energy required compared to present industrial production processes. All the foams were produced in controlled expansion through the adoption of a ‘one‐shot’ approach, using water as a blowing agent and with an isocyanate index (NCO/OH) of less than 100 to improve the flexibility of the foam. This approach allowed for the substitution of up to 12% of common petro derived polyol with commercial soda lignin. Finally, the foams were characterized, presenting properties that could be modulated as a function of lignin content, GLY/EJ 300 ratio and isocyanate index. The qualities of the foams were compatible with existing materials used for furniture and for the interiors of car seats and couches. © 2015 Society of Chemical Industry     

导电剂对柔性锌锰电池放电性能的研究

研究了掺杂多壁碳纳米管、石墨及乙炔炭黑对柔性锌锰电池电化学性能的影响。分别在不同的放电电流的条件下,测试电池的放电性能。研究结果显示,掺杂导电剂后锌锰电池的性能均得到显著提高。其中碳纳米管掺杂锌锰电池表现性能最佳,其次是乙炔炭黑和石墨。其中掺杂碳纳米管电池0.2 mA放电时间高达252 h,容量为50.4 mA·h,且在0.8 mA和1 mA较大电流放电时,容量损失率最低,其掺杂效应远高于其他导电添加剂。     

探讨汽车变速箱电软轴手动换挡控制系统优化设计方法

在汽车行驶的过程中,特别是启动环节,换挡变速的流程对汽车行驶的安全稳定性至关重要。鉴于此种情形,本文提出了一种汽车变速箱电软轴手动换挡控制系统优化设计方法,能有效地保证汽车在行驶过程中变速箱换挡输出信号正确和快速响应,希望给汽车行驶带来不一样的体验。